[Dx4win] color and priority

Mon, 1 Sep 2003 14:54:30 -0400

The way this was described to me, a new mode is more important than a
new band (as I think most would agree).  The confusing thing is only the
priority number assigned.

73 de Pete, K2PS

Hi Tom,
Thanks for your comment but the QSX frequency is not the issue. Reread
my 
specific example of the issue I found. I can duplicate it every time. I
can 
take any one of the two dozen or so countries that I have confirmed on
SSB 
and worked but not confirmed on any band on CW, make a callout for that 
country on CW on a band I have never worked that country, and the
resultant 
spot is always Blue or Priority 4 and not Red Bolded to indicate a new
band 
country. In the specific example I cite, Priority 4 is taking precedence

over Priority 3 every time. Try it. Regards, Tony N2SS

At 10:09 AM 9/1/2003, Thomas Herrmann wrote:
>The only way I have ever seen wrong colors was in connection with 
>certain
>QSX values. As far as the QSX value (i.e. QSX up 40) is not clearly to 
>identify (lsn at .040 or lsn +40kHz) and the QSX leaves the CW range
into 
>PHONE range I got "new mode" indication. Similar situation appears if 
>there is a comment to address a different mode (i.e. ask him for SSB).
>Please, check QSX and comments.
>
>73, Thomas
>
>Anthony R Gargano N2SS <[email protected]> schrieb am 01.09.03 15:08:41:
> >
> > Yann, there seems to be a Priority problem in the current version of

> > the program. Based on the Priority definitions, my expectation is 
> > that an all time new band which is Priority 3 (Red Bolded) would 
> > take precedence over an unconfirmed mode which is Priority 4 (Blue).
> >
> > However, I have now noted multiple instances of different callouts 
> > where they were new all time bands but unconfirmed modes and the 
> > spots appeared as Priority 4 (Blue) instead of Priority 3 (Red 
> > Bolded). So, despite the numbers, Priority 3 vs Priority 4, it seems

> > that the program logic being applied is that an unconfirmed mode is 
> > of higher priority than an all-time new band. I hope my explanation 
> > was clear. Tony N2SS
> >
> > At 04:02 AM 9/1/2003, you wrote:
> > >From: "F5NBU" <[email protected]>
> > >To: <[email protected]>
> > >Date: Mon, 1 Sep 2003 08:24:30 +0200
> > >Subject: [Dx4win] color and priority
> > >
> > >hello
> > >some problem with the color and priority for dx spot
> > >exp:
> > >this morning :
> > >v63sxw spot on 40m cw
> > >never contact on this band on any mode but work on cw on other band
> but not
> > >confirmed
> > >the color was blue grey priority 4
> > >
> > >5w0mw spot 40m cw
> > >never contact on this band on any mode but contact on other band 
> > >and confirmed the color was red and priority was 3
> > >
> > >i sink the priority was the same for the 2 spot
> > >priority 3 and red color
> > >
> > >tnx for help if it was a configuration problem
> > >
> > >best 73
> > >
> > >Yann GELLENS
> > >[email protected]
> > >
> > >
> > >
> > >--__--__--
> > >
> > >_______________________________________________
> > >Dx4win mailing list
> > >[email protected] 
> > >http://mailman.qth.net/mailman/listinfo/dx4win
> > >
> > >
> > >End of Dx4win Digest
> >
> >
> > _______________________________________________
> > Dx4win mailing list
> > [email protected] 
> > http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>_______________________________________________________________________
>___
>Die sicherste Form der Kommunikation: E-Mails verschluesseln,
Spam-Filter,
>Adressverifizierung, digitale Unterschrift: http://freemail.web.de

_______________________________________________
Dx4win mailing list
[email protected] http://mailman.qth.net/mailman/listinfo/dx4win