[Dx4win] PSK31 support for LPT keying

Mon, 27 Oct 2003 12:59:58 -0000

Dear Larry,

I had a similar problem with lack of serial ports, I brought a USB
adaptor for about $100, which gave me 4 additional serial ports. The
adaptor came from the states and if that solution appeals to you I'll
send you manufacturers tel number. I am at work now and the info is at
home.

I am sure you have considered this solution, however, it=92s a shame it
does not work for you as it did in DX4WIN earlier version.

Kind Regards
=A0
=A0
Tony Lord
G8DQZ

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Larry Gauthier (K8UT)
Sent: 26 October 2003 11:26
To: [email protected]
Subject: [Dx4win] PSK31 support for LPT keying

Due to a shortage of serial ports, I use LPT1 to key CW in DX4WIN. This
works fine for CW, but when operating in PSK31 mode, the LPT keyed line
does
not seem to operate. I have gone into the PSK Tx preference window and
checked the "use CW control" - but the LPT CW line does not work from
PSK.
(the frustrating fact is that PSK keying _does_ work under exactly the
same
settings from the COM port - but my com ports are dedicated to other
functions).

Am I doing something wrong here ?

-larry
K8UT

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win