[Dx4win] RTTY Operation Problem

[Paul van der Eijk]

Stan,

1. You can change the mode for the radio when selecting RTTY:
See Fle | Databases | Radios | Select your radio
Select the values tab
Under mode values: look at  SSB values,
select RTTY and copy the first value (think this is LSB)

2. On the main form, under Radio: Select Ignore mode in real-time
Enabling this will let you select RTTY, switch to LSB on the radio,
but ignore the different mode when reading the radio.

Hope this helps,

Paul



At 05:19 PM 10/6/03 -0400, Stan Staten wrote:
>I am not sure if this is the right forum to ask, but since it
>starts with DX4WIN, I will start here and be thankful for any
>thoughts, including the forum I might find a solution.
>
> 
>
>Setup
>
>FT-1000MP
>
>DX4WIN
>
>Any of the RTTY software packages interfacing AFSK to the XCVR
>
> 
>
>Problem
>
>Click on a RTTY spot in DX4WIN and the radio is put in RTTY mode.
>The problem is that the RTTY mode of this radio is FSK.  I then
>hit LSB to get it into LSB mode and work the contact.  It is then
>logged as SSB unless I push the RTTY button before completing the
>logging operation.  This becomes even more cumbersome if there is
>split operation as I need to do the LSB thing, transfer the
>setting to VFO B and then re-dial in the offset.
>
> 
>
>Any suggestions on making FSK RTTY operation more convenient
>would be appreciated.
>
> 
>
>73 Stan, N3HS
>
> 
>
> 
>
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>_______________________________________________
>Dx4win mailing list
>Dx4win@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul van der Eijk (KK4HD)
pvander@erols.com
http://www.dx4win.com