[Dx4win] Kenwood TS-690S

Sun, 25 May 2003 12:57:20 -0400

Bob

It should be pretty straight forward.  You can use TS-450 as well.  Sounds
like there might be a problem with the interface, so you might want to try
some other software.

Make sure the baud rates match (if I remember Kenwood is fixed at 4800 baud
something like N82).

You should be able to open something like Hyperterminal, set it up on the
com port for the radio at 4800 and move the VFO.  At that point, data should
flow across the screen.

Mike VA3MW
----- Original Message -----
From: "Bob Marzari" <[email protected]>
To: "Dx4win" <[email protected]>
Sent: Sunday, May 25, 2003 11:03 AM
Subject: [Dx4win] Kenwood TS-690S

> Can someone give me their parameters for setting up a Kenwood TS-690S with
> DX4WIN 5.02 ????
>
> I have tried all three choices from the program and not having any luck.
> Before I blame my homebrew IK2BCP interface I want to make sure I have the
> proper data going to the radio.
>
> Thanks,
>
> Bob, W3PT
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>