[Dx4win] Loss of Proper BAND Display

[S. Markowski Jr.]

Hi All,

Problem resolved.  I received an email from Steve, NR4M. His suggestion 
was to do a microprocessor reset for the radio involved.  That FIXED the 
problem with the software, now to reprogram the lost memories.
Thanks to All for the responses!
73,
Zig KM9M

S. Markowski Jr. wrote:
> Hi All,
> 
> I've also shut down the computer and radio for appx 60 minutes, restart 
> both, problem still there.  I ALSO notice that when I go to ANNOUNCE DX 
> , the Frequency readout is now always 18072.8, regardless of what the A 
> or B VFO is on, but the QSX FREQUENCY will read accurately. example:
> 6W6JX is now ON 10.119.10(my vfo reading): If I go to ANN DX window:
> FREQUENCY is 18072.8, QSX FREQ IS 10.119.8
> My framing hammer is nearby!  :-(
> Tnx & 73,
> Zig KM9M
> 
> Jim Reisert AD1C wrote:
> 
>> Zig, try rebooting your computer. I lose my ICOM radio control every 
>> now and
>> then, and rebooting always fixes it.
>>
>> 73 - Jim AD1C
>>
>> --- "S. Markowski Jr." <km9m-zig@attbi.com> wrote:
>>  
>>
>>> The BAND is not following where the radio goes now when change of 
>>> band is done manually.  It seems to be following properly with "click 
>>> and shoot" off the cluster.  The settings in preference have not 
>>> changed, and the CAT indicator cycles as before. Any ideas? I know 
>>> it's old-fashioned, but I still enjoy spinning the VFO to look for 
>>> DX!  ;-)
>>
>>
>>
>>
>> =====
>> Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
>> USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
>> PGP Fingerprint: D8E2 3D78 339F A7F1 8C13  1193 B5D1 4FB6 79D1 70DC
>>
>>
> 
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
> 
>