[Dx4win] ve2lx ft 1000d

Wed, 12 Mar 2003 07:57:16 -0600

I have a Yaesu FT-1000MP MKV and use the following, works fine;
          Radio Type:   Yaesu FT1000MP
          Address:         00
          Baudrate:        4800
          Default:           checked
          Com Port:       COM1
          Poll rate (ms):  1000
          Max tries:         6
          Notes for radio:  empty
I believe for the FT1000D you have to set "Radio Type" to Yaesu FT1000 and
check "Default". Note that "Notes for radio" will now show "Requires EPROM
6.0 or later". You must have EPROM 6.0 installed. If not your 1000D will not
work with computer control.

I would call Yaesu again and mention the above. Only this time talk to a
different technician!!!
73 de John/KC9JS
Twin Lakes, WI
USA
www.qrz.com/callsign/kc9js
*****************************************

----- Original Message -----
From: "ve2lx" <[email protected]>
To: <[email protected]>
Sent: Wednesday, March 12, 2003 06:45 AM
Subject: [Dx4win] ve2lx ft 1000d

> hello to all again
> request
> I will be doing the next contest with the ft 1000d
> but problem
> with my icom ic 765 the 2 digit radio adress command is 44 to configure in
> preference/radio
> but with ft 1000d unknown adress
> the technician direct at YAESU USA never earded about decimal radio
command
> adress ...?
> dx4win log book said yesterday there is no adress with yaesu radio
> so I tried to remove the default 00 in the adress commad field but does
not
> work !
> so
> how can my logbook from my computer can see automatically from ft 1000d
the
> band - freq - mode
>
>
> is there a member of this group can help me......
> Gilles ve2lx
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>