[Dx4win] Submission form

Wed, 18 Jun 2003 14:49:52 -0700

Didn't I read recently that you do not have to submit a listing of the
enclosed cards anymore ?

Rod WC7N

----- Original Message -----
From: "Wendell Wyly" <[email protected]>
To: "Carter Grabarczyk" <[email protected]>; <[email protected]>
Sent: Wednesday, June 18, 2003 2:26 PM
Subject: RE: [Dx4win] Submission form

> I had the same problem, but it is really not worth Paul fixing.  Simply
mark
> the offending qso's as INVALID and re-run the submission.  I always
> recommend that you make and keep a copy of your log before you do a
> submission and afterwards.  This way it is very easy to back up if you
> discover that you made a mistake in the submission.  After you get past
this
> first submission, everything works fine for many years of submissions for
> DXCC.
>
> If you don't want to go to this trouble, then line out the bad qso on the
> submission form and DO NOT include the card.  ARRL will get it right and
> send you back a copy of their tab run.
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of Carter Grabarczyk
> Sent: Wednesday, June 18, 2003 4:02 PM
> To: [email protected]
> Subject: [Dx4win] Submission form
>
> Fellow DX4Win users,
>
> I'm getting ready to submit for CW and RTTY DXCC, so I printed out the
> "Submission" under DXCC-Reports in version 5.03. It seems I have
> discovered two problems (or at least problems to a DX4Win beginner like
me).
>
> First, I "F2ed" some contacts to submit for mode that were made in the
> 1960s. As I later found out, you cannot use contacts made before 1975.
> This is only a very minor problem, but I'm wondering why the software
> let me do it.
>
> The other problem I have is one I am a little more concerned about. I
> went back to the old QSOs, and then changed the "Submitted" choice under
> "mode" back to "---" and then saved and exited the program. Upon going
> back into the program and viewing the submission report, I see that
> these pre-1975 contacts are still listed in the report.
>
> Short of manually editing with a word processor (and getting the numbers
> out of sequence), how can I "refresh" the submission report to delete
> those pre-1975 QSOs?
>
> Thanks in advance for any suggestions you may have,
>
> 73/Carter/K8VT
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win