[Dx4win] Problems with v6.02 CW on LPT1 under XP

Mon, 2 Jun 2003 09:19:59 +0100

Mike,

Looking at your reply here, may I ask a further question regarding
userport. I am also running DX4WIN V6.02 under XP. I have no problem
with LPT1, but I also need a second LPT port. I placed a new LPT card in
the comp and it fired up OK. Works fine for printing but does not work
with ARSWIN or my antenna controller. XP assigns a 4 digit address which
is not recognised by these software.

Will userport hep this problem????

73's de Tony M0DQZ

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of VA3MW - Port Credit
Sent: 02 June 2003 02:40
To: [email protected]
Subject: Re: [Dx4win] Problems with v6.02 CW on LPT1 under XP

Dave

I suspect that you will need to install userport
(http://www.embeddedtronics.com/design&ideas.html), as the LPT port is
under
control of the OS in XP.

Mike

VA3MW
----- Original Message -----
From: "Dave - N1PC" <[email protected]>
To: <[email protected]>
Sent: Sunday, June 01, 2003 7:59 PM
Subject: [Dx4win] Problems with v6.02 CW on LPT1 under XP

Hey Folks....

Several weeks ago I purchased the upgrade to v6.02. I have just now
gotten
around to installing it on my IBM T600X Laptop running Windows XP.

All appears to be fine, however I am not able to use LPT1 for CW Keying
as I
could with Win 2K.

When v6.02 starts I get a dialog box that says:

Cannot find LPT1 for keying

But XP reports the port to be working correctly.

This machine has never had any previous versions of DX4WIN installed on
it.
I don't know if that makes any difference or not.

Any ideas?????  Anyone running v6.02 on XP and using the Parallel port
for
CW?

73,

Dave, N1PC

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win