[Dx4win] Problem with SO2R and DX4WIN 6.01

Thu, 30 Jan 2003 23:02:06 -0000

Hi Roger,
Told you about 24 hours ago that this was the PROBLEM and not DX4WIN

73 Guy ON4AOI

BAND DECODER and related stuff at
http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at
http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at
http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at
http://www.on4aoi.be/dxt.htm

MY SALESPAGE with radioamateur & computer parts
http://www.on4aoi.be/sale.htm

----- Original Message -----
From: "Roger Marrotte" <[email protected]>
To: <[email protected]>
Sent: Thursday, January 30, 2003 10:56 PM
Subject: [Dx4win] Problem with SO2R and DX4WIN 6.01


> Well I have fixed my problem with the use of SO2R and DX4WIN 6.01.  I've
> just finished installing a mod to the DX Doubler SO2R box listed on Top
Ten
> Devices Web Page.  They make the DX Doubler. The mod is called "Fix for
> Randomly Generated CW Key Down or PTT Active State Upon Computer Bootup".
> They have you cut out two transistors, bevel the emitter holes on the
> circuit board with a drill to unground these pads, reinstall 2 transistors
> and reroute the two emitters to pin one of the parallel port connector.
It
> took me about 1/2 hour.  SO2R is now working perfectly with DX4WIN 6.01
and
> it's great.  I hope this may help someone who might have the same problem.
> 73, Roger, W1EM
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>