[Dx4win] DX4WIN with IC-746

Fri, 10 Jan 2003 13:08:28 -0000

Mine are the same as yours exceept for poll is 5000 and I have a different
COM port.

You haven't altered the address away from 56 on your radio have you?

Good luck

Bill

----- Original Message -----
From: "Wayne F. King" <[email protected]>
To: "dx4win" <[email protected]>
Sent: Friday, January 10, 2003 10:41 AM
Subject: [Dx4win] DX4WIN with IC-746

> Anyone using an Icom-746 with DX4WIN out there?
>
> What address are you using in your radio setup parameters?
>
> Dx4WIN can read my 746 only after booting up and manually starting the
> radio. When I start DX4WIN I get this pop up window?
> Radio Timed Out, then interface disabled and an exception occurred.
> 0050fa74. adr fffffffff
>
> Like I mentioned above, DX4WIN reads the radio just fine after I have it
> going but I need to start the radio manually and then go into real time
> logging.
>
> Here are my set-up parameters:
>
> Radio 746   address is 56  baud is 9600
> com 1        poll 1000     max tries  6
>
> Also the windows for the radio, com port and cw keyer are NOT filing in
> with the information. They are blank. Nothing in them but when checking
> them the correct info is shaded blue. Nothing else is on com 1 and there
> are no conflicts.
>
> I know this is not right because I have DX4WIN running on my other
> computer with my TEN TEC Omni VI+ and it is fine. So I believe DX4WIN is
>   looking for another address for the IC-746 or different info then I
> have supplied.
>
> 73--Wayne N2WK
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>