[Dx4win] DX4WIN with IC-746

[Wayne F. King]

Anyone using an Icom-746 with DX4WIN out there?

What address are you using in your radio setup parameters?

Dx4WIN can read my 746 only after booting up and manually starting the 
radio. When I start DX4WIN I get this pop up window?
Radio Timed Out, then interface disabled and an exception occurred. 
0050fa74. adr fffffffff

Like I mentioned above, DX4WIN reads the radio just fine after I have it 
going but I need to start the radio manually and then go into real time 
logging.

Here are my set-up parameters:

Radio 746   address is 56  baud is 9600
com 1        poll 1000     max tries  6

Also the windows for the radio, com port and cw keyer are NOT filing in 
with the information. They are blank. Nothing in them but when checking 
them the correct info is shaded blue. Nothing else is on com 1 and there 
are no conflicts.

I know this is not right because I have DX4WIN running on my other 
computer with my TEN TEC Omni VI+ and it is fine. So I believe DX4WIN is 
  looking for another address for the IC-746 or different info then I 
have supplied.

73--Wayne N2WK