[Dx4win] Newbie to DX4WIN

Sat, 4 Jan 2003 18:25:18 -0000

Wayne;

I did this 1 month ago.

You can look at the errors with F8, and fix them , but with 137K you wont be
keen to do this, for some reason !!  Ouch !  I had 12 K errors at that
point.

Most of them are due to frequency - from memory, Logplus uses 1.832 MHZ, for
example, but I think the import assumes this was 1832; and throws up an
error!!

I solved the problem by exporting the LogPlus log to BV (QSL card program by
DF3CB)  firstly;   and then exporting this into ADIF.   This solves ALL of
the frequency error problems.

A word of warning - dependent on what info you have in LogPlus - All my IOTA
refs got screwed up, because I was stupid and let DX4WIN default the values
!!!     For example, if I worked a G, and entered an IOTA ref of EU120;
when I did the ADIF import, it reset this to EU005, which cover 99% of G's
!! I think that there was an option on import that leaves them as they are
set. You should do this.

Hope it works ok Wayne.

It is a good programme; I am glad that I made the switch !

73

Dave
G3NKC  (op and QSL Manager for MD4K / MD6V)

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Wayne F. King
Sent: 04 January 2003 13:38
To: dx4win
Subject: [Dx4win] Newbie to DX4WIN

Hi Folks,

I just got DX4WIN and I need to import my data from LogPlus V4.
Anyone out there have experience with DX4WIN/LogPlus ?

I have tried but I get 137K errors. So if you have a solution maybe you
could help me out.

NHY,

Wayne N2WK

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win