[Dx4win] Using LPT1 with DX4WIN and Win2000

Mon, 24 Feb 2003 06:27:39 -0000

Hi Jim,
You don't need Direct I/O for DX4WIN all drivers are included, I now
writelog doesn't
support W2K and XP LPT drivers and with Direct I/O you have a work around.
If you don't start these driver I'm sure that DX4WIN will be working
correct.

About your dx-doubler check his hardware page , there is hardware error that
can be fixed
with modifying your doubler.

73 Guy ON4AOI

BAND DECODER and related stuff at
http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at
http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at
http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at
http://www.on4aoi.be/dxt.htm

MY SALESPAGE with radioamateur & computer parts
http://www.on4aoi.be/sale.htm

----- Original Message -----
From: "James R. Kauten, MD, W4TE" <[email protected]>
To: <[email protected]>
Sent: Saturday, February 22, 2003 10:08 PM
Subject: [Dx4win] Using LPT1 with DX4WIN and Win2000

> Does anyone have the LPT port working with DX4WIN v6.02 and Windows 2000?
>
> I use Direct I/O
(http://www.direct-io.com/index.htm?http&&&www.direct-io.com/kb/q600003.htm)
to use the LPT port when using WriteLog for contesting (OS-Windows 2000).
It will appropriately switch between 2 radios using the Top Ten Devices "DX
Doubler" box and keys the appropriate radio when using CW.
>
> I have set up Direct I/O to use with DX4WIN v6.02 but have not been able
to get it to key CW or switch the DX Doubler box as it will with WriteLog.
>
> I receive the following error messages:
>
> "Cannot find LPT1 for Radio 1/2 Switch"  and
>
> "Cannot find LPT1 for Keying"
>
> Any help would be appreciated.
>
>
> 73,
> Jim Kauten, MD, W4TE
>
>
> ********************************************
>
> James R. Kauten, MD, W4TE
>
> [email protected]
> [email protected]
>
> DXCC
> ARRL Life Member
> AMSAT Life Member
> INDEXA Life Member
> Southeastern DX Club President (SEDXC)
> South East Contest Club Member (SECC)
> Buckhead Contest Club Life Member
> Northern California DX Foundation Member (NCDXF)
>
> ********************************************
>
> This email was powered by MDaemon and scanned by AntiVirus Plug-in for
MDaemon.
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>