[Dx4win] DX Spots Window

Fri, 21 Feb 2003 07:44:02 -0500

Mel and others, Jim-AD1C informed me that checking the "Backup DX spots" box
doesn't have anything to do with this problem and the spots should be saved,
regardless of this box being checked, when you exit DX4WIN. That wasn't
happening for me, and apparently for some others. It started working after I
checked the box, but I don't know if unchecking the box now would cause them
to stop being saved as I have reverted back to using V5.02 due to other yet
unresolved issues in V6.02. that make it more difficult to use with Kenwood
radios as well as those who have CW keying and PSK31 PTT on different COM
ports. 73, -=Rog-K9RB=-

----- Original Message -----
From: "Mel Martin (VE2DC)" <[email protected]>
To: "'Roger Borowski'" <[email protected]>; <[email protected]>;
<[email protected]>; "'Erik Hyllander'" <[email protected]>
Sent: Friday, February 21, 2003 6:55 AM
Subject: RE: [Dx4win] DX Spots Window

> I DON'T have "backup spots" checked... And they are still there next
> time I start DX4Win...
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> On Behalf Of Roger Borowski
> Sent: February 20, 2003 8:33 PM
> To: [email protected]; [email protected]; Erik Hyllander
> Subject: Re: [Dx4win] DX Spots Window
>
>
> In Preferences | Packet1 | make sure you have the options box labeled
> "Backup DX spots" checked. That will save the spots up to the number in
> the Preferences | Packet2 | scrollback capacity for DX spots box. 73,
> -=Rog-K9RB=-
>
> Sure wish the separate COM port selection for PSK31 PTT and CW keying
> are restored as well as fixing the Kenwood "VFO B" non=activation for
> split frequency spots......The upgrade took me two features
> backwards.....Both worked great before V.6.xx......Wayne.....Help
> please!
>
> ----- Original Message -----
> From: "Erik Hyllander" <[email protected]>
> To: <[email protected]>; <[email protected]>
> Sent: Thursday, February 20, 2003 11:40 AM
> Subject: [Dx4win] DX Spots Window
>
>
> > Hello,
> > last Feb. 15 I posted the following message:
> >
> >  >"Another observation is that all spots from internet are lost after
> > exit from DX4WIN. When I use my "normal" set-up to >the local
> > DC-cluster via
> 144
> > MHz spots remain."
> >  >
> >  >Now the two cases are identical i.e. spots are lost when opening
> > DX4WIN again, v 6.02. I have the impression that it >was ok in the
> > beginning, there are spots saved from from Feb. 9 and 10. This has
> > nothing to do with checking 'Leave >all windows in original position'
> > in Preferences/Screen.  >  >I think it is of value to save earlier
> > spots in this window to check where a station has been operating etc.
> >  >
> >  >Paul, please put it back in the next version, it works ok in v 5.03.
> >
> > Now, I got the idea to reinstall 6.02 and found that it didn't help.
> > In DX4WIN.put there are a bunch of spots from start and they remain
> > but all spots added, coming from internet or local 144 MHz link, are
> > gone after restarting DX4WIN.
> >
> > I got one answer from AD1C/Jim who has not this problem. Are there no
> > others but me having the problem? Using W98SE.
> > Erik
> >
> > Erik Hyllander, SM0LZT
> > e-mail: [email protected]
> > alt.: [email protected]
> > Packet: SM0LZT@SK0MK
> >
> > _______________________________________________
> > Dx4win mailing list
> > [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
> >
>
> _______________________________________________
> Dx4win mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/dx4win
>