[Dx4win] Print on Back of QSL Card

Sat, 15 Feb 2003 23:36:30 -0600

I don't think everything that you wish to do can be done by DX4WIN or any
program for that matter.  DX4WIN separates PSE and TNX qsls but not SSB and
CW unless they have different qsl managers.  I have room to print about 5 or
6 qso's on my cards and that is only a limitation of my cards.  The main
problem is to be sure you have a printer that will pull your qsls in from
the short end and handle a stack of them.  I use an EPSON 2000P which uses
archival pigmented inks and they will last a long time and not fade.  Your
printer ink may not last forever.

I use it to print all my qsl cards and it works just fine (V 6.02 that is).
The info below is caused by me having to fool my printer, so you will have
to experiment with the spacing, etc., but it works well.

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Alan Clark
Sent: Saturday, February 15, 2003 9:00 PM
To: [email protected]
Subject: [Dx4win] Print on Back of QSL Card

I want to print the label directly on the back of my 5 1/2w x 3 1/2t QSL
cards.  I would like to be able to print 8 to 10 QSO's on each card.  How
can I set it up in a custom label to do this.  One thing is that it tries to
print SSB contacts on one label and CW on another and I do not want to
separate them.

73's
Alan, N5PA

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win

--- StripMime Report -- processed MIME parts ---
multipart/related
  multipart/alternative
    text/plain (text body -- kept)
    text/html
  image/bmp
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---