[Dx4win] Fw: Rig Communication problem

[Michael Walker]

Argh..

I figured it out.  I've even answered this problem more than once.

I'm getting old..

Turn RTS and/or DTR on in preferences to power up the converter.

Mike
----- Original Message -----
From: "Michael Walker" <mike.walker@rogers.com>
To: "DX4Win >" <<dx4win@qth.net>
Sent: Friday, April 18, 2003 2:05 PM
Subject: Rig Communication problem


> OK, I thought that I would never have to write an email like this, as I
have
> solved just about every radio communication problem that has been
presented.
>
> That being said, DX4Win (5.03 on XP) and only DX4Win is not able to
> communicate with the Radio IC-756Pro.
>
> So, I've done the obvious.
>
> WriteLog works with the IC-756.  This eliminates the communication path
and
> the radio as part of the problem.  I can even use Hyperterminal to see the
> data coming out of the radio as well as using
>
> The Hex address and baud rate on the radio match Radio settings in DX4Win
> (x'5C' and 19200--I've tried out other baud rates with no success).
>
> I've even re-installed 5.03 on top of the current installation.  No joy
> there either.  It used to work with DX 5.03, but the last time I remember
it
> working was on another XP installation with the same hardware.
>
> So, what did I miss?  I find it hard to believe that this is a DX4Win
issue,
> but it seems to point that way.
>
> Thanks in advance.. Mike VA3MW
>
> DX Cluster
> telnet://va3mw.homeip.net:41112
>