[Dx4win] Soundcard questions

Mon, 18 Nov 2002 13:49:13 -0500

Open the mixer program and see if the line-in port is muted.  Or, perhaps
you just have to increase the volume level for the line-in port on the
mixer.  Of course, there are a lot of other possibilities as well!

K8AC
Floyd Sense in Angier, NC
----- Original Message -----
From: "Rick Stoneking" <[email protected]>
To: <[email protected]>
Sent: Monday, November 18, 2002 12:32 PM
Subject: [Dx4win] Soundcard questions

> Sorry if this is a bit off topic.
>
> I have been trying to get my radio (TS-950SD) setup to use RTTY/PSK31 and
I
> have made the cable to go from the connector on the back of the radio to
> the soundcard.  I plugged the cable into the line in jack on the sound
card
> and could not get anything to work.  I found that if I plugged the cable
> into the mic input everything is fine - with the exception of the fact
that
> I now no longer have a microphone plugged into the computer - which I do
> use for other things.  The computer is a several year old Micron 230MHz
> Pentium machine with the soundcard integrated on the motherboard.
>
> Thanks,
> Rick
> W2RDS
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>