[Dx4win] Logging exact Frequency

[Dave Henderson]

George

To get the $$ command to work putting the exact frequency in the log ....do 
the following

Go to the <LOG ENTRY> window
  click on <QSO>
click on <CONTEST MODE>
  A little pop up box appears, and there is a box at the bottom <TEXT TO 
ADD TO QSO NOTE>
put <$$>  in this box ...click on <OK> ( you apparently do not need to 
"check" the little box "<ENABLE CONTEST MODE> to get this feature to 
work...go figure that one !)

all subsequent QSO's should record the freq in the comment field.
Note: If you have a QSO in "progress" in the entry window  the frequency 
will not be added to that QSO but to all others after that

Let me know if this doesn't work

Dave
NR1DX




At 02:01 PM 3/19/02 +0000, George Beasley wrote:
>I am wondering if there is a way of permanently logging the exact QRG in the
>notes for this QSO field? I know I can do it by CTRL-R for each QSO but I
>want it to be automatically inserted for every QSO.
>
>I want to keep the Band in Meters for QSLing etc. so I don't want to do it
>that way. The users guide says use $$ but that does not seem to work.
>Anybody doing this?
>
>73 de,
>George 5B4AGC
>Web Page http://www.qsl.net/5b4agc
>
>_______________________________________________
>Dx4win mailing list
>Dx4win@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win