[Dx4win] Band/mode tracking

[Todd Strait]

Hi Mark,

I have had my FT920 since ver. 4.x and am currently on 5.3 and I can't
remember seeing this phenomenon.  I have had on occasion where the rig
seemed to lock up and had to re-boot the computer and shut off the radio to
get them conversing again although this has been very rare over the years.

73,
Todd
WM8C's Ham Links & More
http://wm8c.0catch.com
http://www.angelfire.com/mi2/wm8c
http://www.qsl.net/wm8c

----- Original Message -----
From: "Mark Endorf" <mendorf@isd.net>
To: <dx4win@mailman.qth.net>
Sent: Monday, March 18, 2002 8:07 PM
Subject: [Dx4win] Band/mode tracking


> Just an observation that I thought I would share.
> I noticed sometime after trying to work the Ducie operation split on 15M,
> the frequency and mode in "real time logging" were not being displayed in
> DX4WIN correctly. Using an FT-920 with VFO A on the receive frequency, and
> VFO B on my transmit frequency, I would periodically change bands on the
> receive VFO to check on the other Ducie station.
> At the end of the evening DX4WIN only showed 15M SSB, no mater what band,
> mode, or VFO combination I tried. I had to correct several QSO's by
memory,
> that all were logged as 15M-SSB. It got fixed by turning the rig and
> computer off, then back on again.
> Anyone else seen this? DX4WIN or FT-920 problem?
> Mark - WA0MHJ
> _______________________________________________
> Dx4win mailing list
> Dx4win@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>