[Dx4win] Filter and QSL printing Help

Sun, 16 Jun 2002 16:52:39 +0200

Thanks for the answer!

If I have 20 QSO that I will mark with a special QSL-method (e.g. $$$$$$),
can I do that with one command (multiple QSO operation)? Now I select every QSO and change every one (that is 20 changes).

Another question: If I have 3 QSO:s from the same station among the 20 and I change one QSO and then press F10 the cursor (highlighted QSO) in the logbook  radomly jump to another QSO among the 20 so I have scroll back to catch and change the other two. I would like the cursor in the logbook not to move at all. How to do that??

73
Per/SM4SX

----- Original Message ----- 
From: "Wendell Wyly W5FL" <[email protected]>
To: "Per Börjesson" <[email protected]>; <[email protected]>
Sent: Saturday, June 15, 2002 6:38 PM
Subject: RE: [Dx4win] Filter and QSL printing Help

> Unfortunately, that capability does not exist in DX4WIN at this time.  =
Yes,
> hopefully the filter will be available for printing labels in the  =
next
> version.  The latest version is 5.03 and it will not print labels =
using the
> filter or select single labels either.
> 
> I use the same work arounds you described.  If I have a lot of labels =
to
> print using the filter, I export them, print from that exported log, =
and
> then import that log back in writing over those contacts that were =
exported.
> I am trying to do about six hundred labels that way now and it is slow =
no
> matter how I go about doing it.  I would love to be able to print a =
single
> label from those with label "Y" or those in the filter.
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Per Börjesson
> Sent: Saturday, June 15, 2002 9:18 AM
> To: [email protected]
> Subject: [Dx4win] Filter and QSL printing Help
> 
> 
> Hi,
> 
> I am using version 4.05
> 
> In my database 100 QSO are marked with "Y" print QSL label. Now I use =
the
> filter to select those which are marked with both QSL print label "Y" =
and
> confirm "Y" and they are 20. These I want to print labels for. If I =
now
> select labels/print QSL labels I got the 100 QSO marked with "Y". How =
to do
> to only get the 20 ?????
> 
> One way of course is to mark them with a special QSL-method (e.g. =
$$$$$$)
> and then select that when printing but much easier if I can use the =
filter.
> 
> Perhaps I need a later version of DX4WIN ??
> 
> 73
> Per
> [email protected]
> 
> 
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
> 
> 
> 
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win