[Dx4win] MMTTY xmit & rcv keys

Wed, 12 Jun 2002 21:14:39 -0400

Floyd,

8 x 2 = 16 keys (counting Ctrl key)

Paul

At 02:35 PM 6/12/02 -0400, Floyd Sense wrote:
>Yes, you are correct and that's certainly good information.  However, I'm
>one of those old-time RTTY guys who sometimes actually carries on a two-way
>conversation in RTTY mode!  That makes the canned macros not always very
>useful.  I find that I have 7 of the 8 function keys already populated with
>canned messages.  If I had a couple of spares, then I could put just a "\"
>in one string (switch to receive) and "%T" in the other (switch to
>transmit).  The alternate function keys selected by pressing CTRL, of
>course, defeats my goal of a single keystroke to switch.  Now if we just had
>12 function keys we could set up instead of the 8, that might be a
>reasonable alternative.
>
>K8AC
>----- Original Message -----
>From: "Dave" <[email protected]>
>To: <[email protected]>
>Sent: Wednesday, June 12, 2002 12:33 PM
>Subject: Re: [Dx4win] MMTTY xmit & rcv keys
>
>
>> Floyd et all
>>
>> For most of the standard  messages the transmit and receive commands can
>be
>> embedded in the DX4WIN pre-programmed RTTY message function keys using "/"
>> and "%T" at the end of the line.The most useful info I have seen on this
>> was sent to me a few weeks ago by Larry K8UT and John WA9ALS. The info is
>> on John's WEB page at....
>>
>> http://www.qsl.net/wa9als/dx4win-mmtty-macros.rtf .
>>
><snip>
>
>_______________________________________________
>Dx4win mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/dx4win 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul van der Eijk (KK4HD)
[email protected]
http://www.dx4win.com