[Dx4win] 756ProII rig file

[K2DBK - David]

Greg,
         Thanks a million! That worked perfectly. I am curious though: 
Where did you find that tacking the 01 (or 02 or 03) would set the filter? 
I checked the manual, and the only thing I could find was that 06xx would 
set the radio to mode xx (which DX4WIN does a fine job of inserting). 
There's (apparently) no mention of specifying the filters that I could 
find. (I'm wondering what other tricks might be out there.)

73,
         David, K2DBK

At 11:52 PM 7/27/2002, Gregory Brown wrote:

>David,
>
>I'm using an older version of DX4WIN and am using the IC-775 radio file with
>my IC-756 PROII, but this command should work for your setup, too.  To get
>DX4WIN to call the wide CW filter (filter 1), change the Set Mode command
>string to 060001FD.  This will call the wide filter for SSB, too.  I like to
>have the radio go to wide filter when clicking a spot, because the
>frequencies for spots are sometimes not highly accurate.  If you would
>rather call the medium or narrow filters (for some reason). use the command
>strings 060002FD and 060003FD, respectively.
>
>Greg KT0K