[Dx4win] IC-746 and PC Control

Wed, 24 Jul 2002 08:30:21 -0600

Look at the IC756 pro rig file -- I believe that it sets filter set two
-- which is what you want and the commands for setting the filter should
be the same.

73,
Mike WA0SXV

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Tom Branch
Sent: Tuesday, July 23, 2002 20:03
To: DX4WIN Reflector
Subject: [Dx4win] IC-746 and PC Control

The quest continues.  I was able to download a piece of freeware that
allows
me to watch the data as it flows between the PC and rig.  The $06
command
sets the mode.  It appears that DX4WIN is sending $06 $03 to set the
mode to
CW.  The rig defaults to CW Wide (i.e. no filter).  Using the command
$06
$03 $02, sets the mode to CW and sets the narrow filter!  Now how to
edit
the radio file to send the longer data string..  This is not my strong
area
guys--any software types want to look at the ICOM 746.rig file and give
me
some ideas?

73 de Tom, K4NR