[Dx4win] death to labels
Jim Rhodes
[email protected]
Sun, 27 Jan 2002 10:51:58 -0600
This is what I use for my cards. I have set up Custom2 label format as follows:
Label Width: 119.99 Label Height:35.50 Nr across:1 Nr down:1
Horiz Pitch:119.10 Vert Pitch:32.99 Paper siz:
custom
Spacing left:19.99 Spacing top:45.01 Page
width:140 page height:80
Horiz shift:0.00 Vert shift:0.00 Max
QSOs:0 Portrait:(checked)
Callsign Font:Andale Mono
Body Font:Andale Mono
Options: Comercial:9checked) Use lines:(unchecked) Call right
aligned:(unchecked)
This was posted to the reflector some time ago by one of our friends. I do
not take credit for that. They can be adjusted to fit your cards. However,
I designed my own format without the boxes. This allows Dx4Win to print
several QSO's on one card. Thus the Max QSOs is set to 0 to allow the
program to do this. If you only want 1 QSO per card, set this to 1.
At 10:08 1/27/02 -0500, Ed Himwich N3HXQ wrote:
>I am interested in printing directly on QSL cards to avoid the use of labels
>as much as possible. I have looked a bit at the help file, but haven't found
>anything that indicates how this might be done. My best guess is that it
>would be a custom label, but I don't see anyway to arrange the information
>so that it will appear in the correct locations to match the boxes on QSL
>cards.
>
>Another issue is that it there would need to be a way to suppress the
>printing of addresses for direct QSL cards so that they aren't printed onto
>cards. However, it would still be good to print the address labels, maybe
>there could be an option to print just the QSLs that have addresses on label
>stock. The printed QSL labels could be used to match the address labels to
>the cards.
>
>Last, but not least: Is there a way to start printing in the middle of a
>partially used sheet of labels?
>
>73, Ed N3HXQ
>
>_______________________________________________
>Dx4win mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/dx4win
Jim Rhodes K0XU
[email protected]