[Dx4win] CW Keying on Mark-V

Thu, 10 Jan 2002 22:53:45 -0000

Hello Alan,

LPT keying problem is probably not caused bij DX4WIN but from your TRX.
I can simulate your problem with my FT1000mp when I set the MONITOR key ON
when OFF the garbage is solved.

73 Guy ON4AOI

DX4WIN soft and related stuff at
http://users.skynet.be/ON4AOI/dx4win.shtml

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
http://users.skynet.be/ON4AOI/keyer.shtml

ARSWIN link and related stuff at
http://users.skynet.be/ON4AOI/web7.htm

DXTELNET soft and related stuff at
http://users.skynet.be/ON4AOI/dxt.shtml

MY SALESPAGE with radioamateur & computer parts
http://users.skynet.be/ON4AOI/sale.shtml
----- Original Message -----
From: "Alan Clark" <[email protected]>
To: <[email protected]>
Sent: Thursday, January 10, 2002 10:34 PM
Subject: [Dx4win] CW Keying on Mark-V

> I know this has probably been rehashed, but I am using a Yaesu FT-1000MP
> Mark-V and am having problems with DX4WIN keying the radio properly on CW.
> I have the computer interfaced to the rig and it is controlling everything
> ok.  I have the W1WEF Model 3 parallel port CW keying interface.  I have
not
> tried it with TR Log yet.  It would be nice to be able to key the rig
using
> the serial cable that you use to control the rig for keying CW via the CAT
> port.  In DX4WIN, using the parallel port interface, it keys the rig, but
> sends garbage.  In DX4WIN I can key a "T" and it sends an "I", key a "M"
and
> it sends an "S" and everything else is wrong, also.  I was looking for any
> insight you have garnished through your experience with DX4WIN?
>
> Alan N5PA
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>