[Dx4win] CW vs CW-R

[Ted Roycraft]

Under the 'radios' directory, in the file "ICOM 756 Pro.rig" if you 
modify the entry
under the [MODES] heading from:

    CW=3;3;N
to
    CW=7;7;N
that will fix the CW-R/SSB problem.  I'm sure there's a similar fix for 
RTTY-R
but I don't have the 756PRO manual here.  (I think it's probably replacing
RTTY=4;4;N by RTTY=8;8;N but I have never tested that.)

Ted, W2ZK

Larry Benko wrote:

> Just noticed that DX4Win ver 5.03 which I generally use with an Icom
> 756Pro interprets the radio in CW mode as CW but if the radio is in
> the CW-R mode then DX4Win interprets it as SSB mode.  Same holds true
> for RTTY.  Radio in RTTY mode is interpreted as RTTY by DX4Win but
> RTTY-R is interpreted by DX4Win as SSB.  Can someone else verify this
> anomoly?
>
> 73,
> Larry Benko, W0QE
>
> _______________________________________________
> Dx4win mailing list
> Dx4win@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>