[Dx4win] CW vs CW-R

Tue, 13 Aug 2002 15:46:56 -0600

Kurt,

Problem only occurs for Icom radios.

73,
Larry, W0QE

Kurt W. Zimmerman wrote:
> I checked my Yaesu FT-920 for CW & CW-R and DX4WIN behaves normally.  It 
> reads either CW mode as CW.  I'm running the same version of DX4WIN.
> 
> 73;
> Kurt - W2MW
> 
> -----Original Message-----
> From:	Larry Benko [SMTP:[email protected]]
> Sent:	Tuesday, August 13, 2002 2:13 PM
> To:	[email protected]
> Subject:	[Dx4win] CW vs CW-R
> 
> Just noticed that DX4Win ver 5.03 which I generally use with an Icom
> 756Pro interprets the radio in CW mode as CW but if the radio is in
> the CW-R mode then DX4Win interprets it as SSB mode.  Same holds true
> for RTTY.  Radio in RTTY mode is interpreted as RTTY by DX4Win but
> RTTY-R is interpreted by DX4Win as SSB.  Can someone else verify this
> anomoly?
> 
> 73,
> Larry Benko, W0QE
> 
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
> 