[Dx4win] SB16 Soundcard & PSK31 Error

Sat, 3 Aug 2002 20:54:34 -0400

I have been using an old SoundBlaster 16 for years and don't have a problem
with PSK31...maybe a setup issue with having the two cards installed and
interaction between them?  Just a thought but I don't think it's the card.
Mine has to be at least 3 if not four years old in my shack computer.
73,
Todd
WM8C's Ham Links
http://www.qsl.net/wm8c
All outgoing emails and attachments are
scanned with Norton 2002

----- Original Message -----
From: "GW4BLE" <[email protected]>
To: "DX4WIN" <[email protected]>
Sent: Saturday, August 03, 2002 6:21 PM
Subject: [Dx4win] SB16 Soundcard & PSK31 Error

> Hello,
>
> Having now successfully (?) installed a second soundcard (I now have an
old
> ISA SoundBlaster16) I have an error message when trying to run PSK31 which
> says - "card doesn't support 16 bit 8000Hz mono format".
>
> Why should this be?  The SB16 works fine for voice keying (i.e. with
> Writelog and a RIGblaster) but why the apparent problem with DX4WIN &
PSK31?
>
> Oh, if anyone is interested, the trick to get the two soundcards installed
> correctly under Windows was to FULLY remove the original soundcard (by
that
> I mean, remove *all* the software drivers and physically remove the card),
> then install the ISA card (SB16) manually (not PnP)  plus software
followed
> by the PCI card (mine is a Yamaha DX-SG).  Sounds easy just saying it like
> that - took a while to figure out the correct sequence of doing things
> though!
>
> Anyway, any SB16 users that can advise on the PSK31 error ?
>
> 73
>
>
> Steve
>
> GW4BLE
>
> Contest Cambria - GW7X (http://www.gw7x.org)
>
>
> 01442 297738
> 07710 055612
>
>
>
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>