[Dx4win] Bug in printing

Sun, 28 Apr 2002 23:34:04 -0500

Yes, I print directly on the cards.  I export only the qso's that are marked
for labels, print the labels in 5.02 (using the 5.03 country list) and then
import these qso's b ack in 5.03 letting the new qso replace the old qso.
It will tell you that it imported 0 qso's, but when you check, you will find
that the qsl dates have been imported with the new dates.  Works just fine
for me printing on an Epson 2000P archive printer.  I hope this will be
fixed in the next release, but 5.02 seems to work just fine.  I also had to
remove the file for the qsl manager addresses as DX4WIN wants to print the
address labels if you check the block to print the QSL Managers (KL7XXX via
W5XXX).

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Ralph Fedor
Sent: Sunday, April 28, 2002 9:45 PM
To: [email protected]
Subject: [Dx4win] Bug in printing

I've been unable to print QSL's for quite some time.  Evidently there is a
bug in 5.03 that will only allow one card to be printed in the landscape
orientation.  Each subsequent card is printed in portrait orientation
which, of course, messes up the whole rest of the stack.

Will this work?

a.)  Import my 5.03 log into an old 5.02 version.
b.)  Print my QSL's with the cards in landscape orientation.
c.)  Import the log back into 5.03 after printing.

Will anything get fouled-up.  Will all the changes transfer back into 5.03
afterwards?

Or even better, does anyone know of any "bug fix" for this or a new version
coming out that will take care of the problem?

73 -
K0IR

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win