[Dx4win] CL PCI-128 sound card and PSK31 setup problems

Dave Henderson [email protected]
Sat, 27 Apr 2002 12:39:37 +0000


The message below was sent last night, got several suggestions on basic 
volume control setting , which doesn't appear to be the problem. This 
morning I dug around in the junk box and found and old ISA Sound 
Blaster  SB-16, I removed the SB PCI-128 and installed the older ISA card 
and bingo within 30 seconds I have waterfall and spectrum displays.  So the 
problem is somehow related to the PCI-128 card, it's interface to DX4WIN or 
a driver issue? Anybody SUCCESSFULLY USING THIS SPECIFIC CARD CARD 
(Creative Labs Sound Blaster PCI-128) and DX4WIN please contact me to 
compare notes.

Thanks
Dave
NR1DX

************************************************************
Message sent last night...........

I'm sure there is something really easy I'm missing here but I've been 
punching buttons for 2 hours now and I'm stuck, read and re-read the users 
guide and the help files  to no avail. it possible its there and I just 
don't see it after two hours.

I'm trying to set up PSK31 for the first time on this system ( I had 
done  it a year ago with a different computer), but never got around to it 
when I upgraded computer platforms

I know I'm getting audio into the sound card because I can hear it from the 
headphones in the sound card OUT and I can decode RTTY through the sound 
card when I'm using Writelog, I can not seem to get any signal display on 
the "waterfall" or the "spectrum" display..in PSK31 mode in DX4WIN?

  I'm running WIN98SE, DX4WIN 5.01 and a Creative Labs Sandblaster PCI-128

Help
Dave
NR1DX