[Dx4win] printers for printing on QSL cards

Thu, 11 Apr 2002 00:01:49 -0500

My cards are set up to take an average size label (clear) in the lower right
hand corner or to print directly on the individual cards.  You can print up
to six or so qso's per card this way. The pre-printed qsl's are one color on
colored stock from W4MPY and are less expensive than printing the entire
card on an inkjet printer.

I use DX4WIN version 5.02 as I had a problem with the current version
printing the first card correctly and subsequent cards wrong.  I have used
an old Deskjet 712C, but like the later model Epsons which will print closer
to the edge of the cards.  I am using an Epson 2000P photo printer which
prints with archival pigmented ink that does not fade with time.  I can feed
a stack of about 1/2 inch or so and put a new stack on when that one runs
out.

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Ed Himwich N3HXQ
Sent: Wednesday, April 10, 2002 10:53 PM
To: Dx4win
Subject: [Dx4win] printers for printing on QSL cards

Hi,

Does anyone know a good printer for printing on QSL cards directly? My
injket printer will feed QSL cards but only a few at a time and it tends to
jam and/or misfeed. I am hoping that there are some printers more suitable
for the task and that work well with DX4WIN.

Thanks in advance, Ed K3PN

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win