[DX] ARRL BPL Video

Tue, 12 Aug 2003 10:23:37 -0400

Yes you're right that some cordless phones operate ~49 MHz and the TV =
VHF
channels that operate from 55 MHz to ~80 are channels 2 to 5. The rest =
is
all over 80 MHz or under in the case of AM broadcast. I am not a fan of =
the
BPL idea at all I just can see how the FCC will start their own
justification process, its all about the money.

Des, N4IN
[email protected]
[email protected]

-----Original Message-----
From: [email protected] [mailto:[email protected]] On =
Behalf
Of [email protected]
Sent: Monday, August 11, 2003 9:45 PM
To: [email protected]; [email protected]
Subject: Re: [DX] ARRL BPL Video

In a message dated 8/11/2003 9:38:04 PM Eastern Daylight Time,=20
[email protected] writes:

> I have to make the correction here, it will not affect AM broadcast =
radio,
> cordless telephones, personal home monitors, TV, or any other device =
that
> receives or transmits RF outside the range of ~2 MHz to ~80 MHz.=20

All of the devices except AM broadcast operate within the specifies
frequency=20
range, and with the tendency of corroded connections within the power =
lines=20
one should expect intermodulation products all over the place making for
extra=20
combinations of interference above, below, and all through the used
spectrum. =20

Do not forget rural America still using 49 MHz devices and off the air =
TV=20
reception.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
     Bob Reed, W2CE      =20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
 [email protected]       [email protected]     [email protected]
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
DX mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx