[Dx-qsl] Fwd: RE: QSL card sort order for sending in? RE: DXCC
Phil Florig
[email protected]
Tue Sep 9 23:00:00 2003
Hi all,
I had a few questions about how to submit cards to the DXCC. Below are
some helpful hints
on the placement of cards from Bill at ARRL. These are just little things
that make
the process go a little faster.
These are questions and answers that I thought may benefit some.
73 Phil
>X-OriginalArrivalTime: 08 Sep 2003 12:43:59.0718 (UTC)
>FILETIME=[E00AA060:01C37606]
>
>
>Hi Phil:
>
>I know you need by band then mode. With multi contacts separate and last.
>
>Questions:
>1) If have card with multi-contacts on it and just need one band where do I
>place it?
>I assume placed in the group with the band needed or do I place multi
>contacts at the
>end no matter what?
>
>REPLY: Multiple cards should still be kept at the end, but a post it type
>note should be placed on it with instruction.
>
>
>2) If the card is required for a mode (ex: rtty) where is it placed?
>I assume placed in the band group where it was made. (ex: 20mtrs)
>
>REPLY: Yes, if it is 20M RTTY you would sort first by band then keep it
>with the RTTY contacts in this group
>
>
>3) If the card is required for a mode like above but has multiple contacts
>on it where placed?
>Again I assume pick one of the bands (if multiple contacts for that mode)
>or if mode only on
>one band put in the band group for the mode required.
>
>REPLY: Again, after arranging by band you separate the modes within the bands.
>
>73
>
>Bill Moore NC1L
>
-----------------------------------------------
Philip Florig e-mail:[email protected]
115 Horne Rd. (or):[email protected]
Columbus, NC. 28722 amateur radio:W9IXX
USA Army MARS:AAR4XX
also:J3X-T30,31,32,33P-VP2MPF
team member:AH1A-J3A-VP2MX
-----------------------------------------------
IPR Systems, Inc. tel: 1-708-385-7500
11651 Mayfield Ave. fax: 1-708-385-7515
Alsip, IL. 60803 email:[email protected]
USA
INDUSTRIAL POWER SUPPLIES & RECTIFIERS
-----------------------------------------------