From wsplawn at att.net  Tue Feb 21 18:39:25 2017
From: wsplawn at att.net (Wayne)
Date: Tue, 21 Feb 2017 15:39:25 -0800
Subject: [DSP-10] 1500 pf feed-through capacitors needed for DSP-10 build
Message-ID: <002101d28c9b$bc9d9870$35d8c950$@att.net>

Greetings,

 

Looking to buy 1500pf feed-through capacitors, thread mount, 8-32UN.

I already have some push-through / solder type mount but I'm hoping to find
threaded mount capacitors.

 

I would like a quantity of 20 or 21 but I could get by for now with just two
to replace ones that were broken on a purchased EZ-Kit-Lite.  I'm also
building a KDSP-10 interface box hence the reason for wanting the larger
quantity.   Digikey and Mouser prices are $6.40 & $7.36 respectively - one
or two at that price maybe but a quantity of 20 gets pretty steep in my
opinion.

 

Hoping someone can help out or suggest alternatives.

 

Tnx & 73

 

Wayne / WA7NE

 


From w9xa at yahoo.com  Tue Feb 21 19:01:37 2017
From: w9xa at yahoo.com (Kermit Carlson)
Date: Wed, 22 Feb 2017 00:01:37 +0000 (UTC)
Subject: [DSP-10] 1500 pf feed-through capacitors needed for DSP-10 build
In-Reply-To: <002101d28c9b$bc9d9870$35d8c950$@att.net>
References: <002101d28c9b$bc9d9870$35d8c950$@att.net>
Message-ID: <17210360.2967886.1487721697890@mail.yahoo.com>

 blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Hello Wayne
? ? ? ?The last 40 I bought were from MPJA. comthey were 1000pF , 63 volt with standard M4 threads.... ? they are a little fragile, and you can easily over- tighten the threads but for $1.49, they worked fine. ? I have no connection with this supplier - but feedthroughs with threads seem to start at about $7/each for 1000pf
from larger suppliers. ? ?These are probably not Mil-Spec.... ?your mileage may vary...etc
73Kermit W9XA

Sent from Yahoo Mail for iPhone


On Tuesday, February 21, 2017, 17:39, Wayne <wsplawn at att.net> wrote:

Greetings,

 

Looking to buy 1500pf feed-through capacitors, thread mount, 8-32UN.

I already have some push-through / solder type mount but I'm hoping to find
threaded mount capacitors.

 

I would like a quantity of 20 or 21 but I could get by for now with just two
to replace ones that were broken on a purchased EZ-Kit-Lite.? I'm also
building a KDSP-10 interface box hence the reason for wanting the larger
quantity.? Digikey and Mouser prices are $6.40 & $7.36 respectively - one
or two at that price maybe but a quantity of 20 gets pretty steep in my
opinion.

 

Hoping someone can help out or suggest alternatives.

 

Tnx & 73

 

Wayne / WA7NE

 

______________________________________________________________
DSP-10 mailing list
Home: http://mailman.qth.net/mailman/listinfo/dsp-10
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DSP-10 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




From w9xa at yahoo.com  Tue Feb 21 19:01:37 2017
From: w9xa at yahoo.com (Kermit Carlson)
Date: Wed, 22 Feb 2017 00:01:37 +0000 (UTC)
Subject: [DSP-10] 1500 pf feed-through capacitors needed for DSP-10 build
In-Reply-To: <002101d28c9b$bc9d9870$35d8c950$@att.net>
References: <002101d28c9b$bc9d9870$35d8c950$@att.net>
Message-ID: <17210360.2967886.1487721697890@mail.yahoo.com>

 blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Hello Wayne
? ? ? ?The last 40 I bought were from MPJA. comthey were 1000pF , 63 volt with standard M4 threads.... ? they are a little fragile, and you can easily over- tighten the threads but for $1.49, they worked fine. ? I have no connection with this supplier - but feedthroughs with threads seem to start at about $7/each for 1000pf
from larger suppliers. ? ?These are probably not Mil-Spec.... ?your mileage may vary...etc
73Kermit W9XA

Sent from Yahoo Mail for iPhone


On Tuesday, February 21, 2017, 17:39, Wayne <wsplawn at att.net> wrote:

Greetings,

 

Looking to buy 1500pf feed-through capacitors, thread mount, 8-32UN.

I already have some push-through / solder type mount but I'm hoping to find
threaded mount capacitors.

 

I would like a quantity of 20 or 21 but I could get by for now with just two
to replace ones that were broken on a purchased EZ-Kit-Lite.? I'm also
building a KDSP-10 interface box hence the reason for wanting the larger
quantity.? Digikey and Mouser prices are $6.40 & $7.36 respectively - one
or two at that price maybe but a quantity of 20 gets pretty steep in my
opinion.

 

Hoping someone can help out or suggest alternatives.

 

Tnx & 73

 

Wayne / WA7NE

 

______________________________________________________________
DSP-10 mailing list
Home: http://mailman.qth.net/mailman/listinfo/dsp-10
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DSP-10 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




From kd7ts at comcast.net  Tue Feb 21 21:42:56 2017
From: kd7ts at comcast.net (kd7ts)
Date: Tue, 21 Feb 2017 18:42:56 -0800
Subject: [DSP-10] 1500 pf feed-through capacitors needed for DSP-10 build
In-Reply-To: <002101d28c9b$bc9d9870$35d8c950$@att.net>
References: <002101d28c9b$bc9d9870$35d8c950$@att.net>
Message-ID: <20170221184256.f496d47e.kd7ts@comcast.net>

On Tue, 21 Feb 2017 15:39:25 -0800
"Wayne" <wsplawn at att.net> wrote:

> Looking to buy 1500pf feed-through capacitors, thread mount, 8-32UN.

http://www.danssmallpartsandkits.net/

use your browser search function to search for feed on the page that opens. Don't be too picky, these things are expensive due to the machining. there are many styles, so be sure you are ordering threaded units. Personally, I would go with the 1000 pf qty50/$6.00 !
-- 
Mike <kd7ts at comcast.net>

From wsplawn at att.net  Sun Feb 26 00:34:34 2017
From: wsplawn at att.net (Wayne)
Date: Sat, 25 Feb 2017 21:34:34 -0800
Subject: [DSP-10] 1500 pf feed-through capacitors needed for DSP-10 build
In-Reply-To: <17210360.2967886.1487721697890@mail.yahoo.com>
References: <002101d28c9b$bc9d9870$35d8c950$@att.net>
	<17210360.2967886.1487721697890@mail.yahoo.com>
Message-ID: <000001d28ff2$033af9e0$09b0eda0$@att.net>

Thank you W9XA and KD7TS for the information regarding the pass through caps.  I have ordered a few and can now move forward thanks to both of you.
73  Wayne/WA7NE

-----Original Message-----
From: DSP-10 [mailto:dsp-10-bounces at mailman.qth.net] On Behalf Of Kermit Carlson via DSP-10
Sent: Tuesday, February 21, 2017 4:02 PM
To: Discussion of DSP-10 2-meter transceiver <dsp-10 at mailman.qth.net>; DSP-10 at mailman.qth.net
Cc: Kermit Carlson <w9xa at yahoo.com>
Subject: Re: [DSP-10] 1500 pf feed-through capacitors needed for DSP-10 build

 blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Hello Wayne
       The last 40 I bought were from MPJA. comthey were 1000pF , 63 volt with standard M4 threads....   they are a little fragile, and you can easily over- tighten the threads but for $1.49, they worked fine.   I have no connection with this supplier - but feedthroughs with threads seem to start at about $7/each for 1000pf from larger suppliers.    These are probably not Mil-Spec....  your mileage may vary...etc 73Kermit W9XA

Sent from Yahoo Mail for iPhone


On Tuesday, February 21, 2017, 17:39, Wayne <wsplawn at att.net> wrote:

Greetings,

 

Looking to buy 1500pf feed-through capacitors, thread mount, 8-32UN.

I already have some push-through / solder type mount but I'm hoping to find threaded mount capacitors.

 

I would like a quantity of 20 or 21 but I could get by for now with just two to replace ones that were broken on a purchased EZ-Kit-Lite.  I'm also building a KDSP-10 interface box hence the reason for wanting the larger quantity.  Digikey and Mouser prices are $6.40 & $7.36 respectively - one or two at that price maybe but a quantity of 20 gets pretty steep in my opinion.

 

Hoping someone can help out or suggest alternatives.

 

Tnx & 73

 

Wayne / WA7NE

 

______________________________________________________________
DSP-10 mailing list
Home: http://mailman.qth.net/mailman/listinfo/dsp-10
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DSP-10 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



______________________________________________________________
DSP-10 mailing list
Home: http://mailman.qth.net/mailman/listinfo/dsp-10
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DSP-10 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html