From cliff_chism at concharty.com Mon Jan 12 04:38:05 2015 From: cliff_chism at concharty.com (Cliff Chism) Date: Mon, 12 Jan 2015 03:38:05 -0600 Subject: [DSP-10] DSP-10 Kit for sale Message-ID: <000001d02e4b$797db210$6c791630$@concharty.com> I have a DSP-10 Kit that I purchased from Bob Larkin or TAPR sometime around 2008 or 2009, I would guess. I have the following: The aluminum enclosure (undrilled). A Rubbermaid container full of the hardware and required for assembly (screws, nuts, connectors, wire, through-hole components, fuses, etc) 3 pages of paper to which are attached the surface mount components (resistors, capacitors, diodes, transistors, etc) (unopened by me and which appear to be prisitine). A printed circuit board, mostly empty, to which I have attached the required jumper wires and coax jumpers. It does not appear that I went further with construction. 3 spools of magnet wire. Assembled (but untested) DSPx Module (ADSP-2185N) that I think I got from KK7P or TAPR Documentation: KK7P DSP-10 Rev B Interface Kit Manual and DSP manual Assembly Notes for DSP-10 Rev B and C by Bob Larkin Addendum for Rev 4.1 -1 Oct 99 Manual DSP-10 Assembly Manual (Draft August 28, 2000) 2 pages of capacitor and resistor placement diagrams 4 pages of 11x17 paper giving parts placement, schematic and enclosure drilling guide. To the best of my knowledge, the kit is complete. But, because it's been so long and I've moved so much, I cannot make any guarantee other than that I wrote above. I can't remember how much I paid for the kit and I have no idea how much to ask for it. So, I am entertaining offers from all comers. Payment will be through Paypal and delivery will be by USPS Priority Mail, prepaid by me. Domestic US responses only, please. I just had my first experience with shipping internationally this morning and I never want to go through that again. My word is my bond. But, if it helps, my ID on eBay is "cliffchism" and I have a 55 blue star 100% satisfaction as both buyer and seller. My callsign is a matter of public record at the FCC. If I get no replies to this or what I think is a fair offer, I will be putting it up on eBay and just take my chances. Seeing as how I don't know how many responses I will get, I will watch my email for 3 days. I will confirm each email I get. At the end of the 3 days, I will notify the winner, and upon payment, there should be no problem shipping the next business day and I will give that person a tracking number. I can't add much more than that given above. But, I will answer any questions that I can. One last thing. please include your callsign with your offer. 73, Cliff Chism KE5FJV From rkolarik at neb.rr.com Mon Jan 12 15:35:54 2015 From: rkolarik at neb.rr.com (Ron Kolarik) Date: Mon, 12 Jan 2015 14:35:54 -0600 Subject: [DSP-10] DSP-10 Kit for sale In-Reply-To: <000001d02e4b$797db210$6c791630$@concharty.com> References: <000001d02e4b$797db210$6c791630$@concharty.com> Message-ID: <54B4302A.8000703@neb.rr.com> Hi Cliff, I recently sold my unbuilt DSP-10 kit for $250. It was the TAPR DSP-10 kit, EZ-lite DSP and the 8 watt brickette kit. I sold it without the EZ-lite DSP board for $100 less than I was asking. That's about what I had in the parts and you can adjust your prices accordingly. 73 Ron K0IDT On 1/12/2015 3:38 AM, Cliff Chism wrote: > I have a DSP-10 Kit that I purchased from Bob Larkin or TAPR sometime around > 2008 or 2009, I would guess. > > > > I have the following: > > > > The aluminum enclosure (undrilled). > > A Rubbermaid container full of the hardware and required for assembly > (screws, nuts, connectors, wire, through-hole components, fuses, etc) > > 3 pages of paper to which are attached the surface mount components > (resistors, capacitors, diodes, transistors, etc) (unopened by me and which > appear to be prisitine). > > A printed circuit board, mostly empty, to which I have attached the required > jumper wires and coax jumpers. It does not appear that I went further with > construction. > > 3 spools of magnet wire. > > Assembled (but untested) DSPx Module (ADSP-2185N) that I think I got from > KK7P or TAPR > > > > Documentation: > > KK7P DSP-10 Rev B Interface Kit Manual and DSP manual > > Assembly Notes for DSP-10 Rev B and C by Bob Larkin > > Addendum for Rev 4.1 -1 Oct 99 Manual > > DSP-10 Assembly Manual (Draft August 28, 2000) > > 2 pages of capacitor and resistor placement diagrams > > 4 pages of 11x17 paper giving parts placement, schematic and enclosure > drilling guide. > > > > To the best of my knowledge, the kit is complete. But, because it's been so > long and I've moved so much, I cannot make any guarantee other than that I > wrote above. > > > > I can't remember how much I paid for the kit and I have no idea how much to > ask for it. So, I am entertaining offers from all comers. Payment will be > through Paypal and delivery will be by USPS Priority Mail, prepaid by me. > Domestic US responses only, please. I just had my first experience with > shipping internationally this morning and I never want to go through that > again. My word is my bond. But, if it helps, my ID on eBay is "cliffchism" > and I have a 55 blue star 100% satisfaction as both buyer and seller. My > callsign is a matter of public record at the FCC. If I get no replies to > this or what I think is a fair offer, I will be putting it up on eBay and > just take my chances. Seeing as how I don't know how many responses I will > get, I will watch my email for 3 days. I will confirm each email I get. At > the end of the 3 days, I will notify the winner, and upon payment, there > should be no problem shipping the next business day and I will give that > person a tracking number. > > > > I can't add much more than that given above. But, I will answer any > questions that I can. > > > > One last thing. please include your callsign with your offer. > > > > 73, > > > > Cliff Chism > > KE5FJV > > > > > > > > ______________________________________________________________ > DSP-10 mailing list > Home: http://mailman.qth.net/mailman/listinfo/dsp-10 > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DSP-10 at mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html >