[DSP-10] Flash Bank 0 link broken on Proaxis.com
Richard Miller
av8torrich at yahoo.com
Tue Dec 1 22:20:00 EST 2015
Hi Mike:
Yes the description of Flash Bank 0 is what I was looking for.
I have been able to make some progress. It looks like there is an issue surrounding the FCI connectors I used on the EzKit. I have corrected this issue, and I am able to get the DSP-10 to lock without issue.
Now it appears as though there may be a problem with the ADC. Right now, I am showing an input signal level (below S Meter) of -178dBm. Since I am pretty sure this is not a realistic noise floor of the DSP-10, I will need to investigate the cause of this. I also note with the lock and signal injection right into the RX Antenna port, I am not able to stimulate the ADC bar graph at the bottom of the screen.
I have also noted I am not able to PTT any longer. It feels like I am getting close, but I will need to play around with this a little longer.
73
Rich
From: kd7ts <kd7ts at comcast.net>
To: dsp-10 at mailman.qth.net
Sent: Tuesday, December 1, 2015 6:19 PM
Subject: Re: [DSP-10] Flash Bank 0 link broken on Proaxis.com
On Tue, 01 Dec 2015 14:49:43 -0800, Richard Miller via DSP-10 <dsp-10 at mailman.qth.net> wrote:
> Hello Group:
> Wondering if anyone could point me to a place where the Flash Bank 0 information is now stored? I just checked Mike's page and I am getting a http404 error.
> 73
> Rich
Hi Rich,
Thanks to Comcast, everything that was Comcast became XXfinity and web spaces were rendered useless. Before they did that I made sure there is a copy at
http://web.archive.org/web/20151003053750/http://home.comcast.net/~kd7ts/
The page (maybe) you are looking for is
http://web.archive.org/web/20130621162807/http://home.comcast.net/~kd7ts/html/Flash/Boot_and_Flash.html
and there is more at Bobs site
http://www.proaxis.com/~boblark/dsp10_dspx_flashbank1.htm
Mike KD7TS
______________________________________________________________
DSP-10 mailing list
Home: http://mailman.qth.net/mailman/listinfo/dsp-10
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DSP-10 at mailman.qth.net
This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html
More information about the DSP-10
mailing list