[DSP-10] Updated DSP-10 Software Available

[Lars Sjöberg]

Help screen F1 error when trying to change to a second window I get E57 error. 

de SM2GCR

Lars Sjöberg
Sweden       
 
Phone: +46 (0)70-5721987.  +46 (0)73-8373236. 
Email: larzs.sjoberg at gmail.com  or larzs.sjoberg at icloud.com


8 maj 2013 kl. 00:31 skrev Bob Larkin <boblark at proaxis.com>:

> Hi All,
> 
> With considerable assistance from KD7TS and W7CQ, new versions of DSP-10 software for both the DSP and the associated PC are now available:
>   Version 35 of UHF3
>   Version 2.94 of UHFA
> Download information is at
> http://www.proaxis.com/~boblark/dsp10.htm#Software_Info
> 
> In that same section (under "DSPx Flash Bank1," there is also a new page and files for loading DSPx flash memory.  This is a major update of the FL1.BAT procedure.
> 
> Changes since UHFA version 3.80 include:
> * Tuning in 0.0014 Hz steps
> * Peak data has been added to the LTI DAT file
> * Provision for a wider  18.6 Hz bandwidth FFT, called 9600 Width.
> * The PageUp key does a quick toggle of the RF gain in CFG determined steps
> * Several minor corrections
> 
> Also I rearranged the Home page some, to make it more orderly.  That process is not quite finished, though.
> 
> Feedback is always wanted!
> 
> 73, Bob  W7PUA
> 
> ______________________________________________________________
> DSP-10 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dsp-10
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DSP-10 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html