[DSP-10] DSP-10: 2-M 8-Watt 'Brickette' Parts Wanted

[Lee Scott - AA1YN]

It is a very simple design and does a good job.  I use it to drive a TE 
systems 1452G. It does not have any SWR protection circuits.  I'll be here 
on the reflector if you have any questions. RF Parts carries the module. 
There is also a 60w version of it.

Lee Scott - AA1YN http://www.aa1yn.com
Home of the VHF & Up Register http://www.aa1yn.com/vhf
Home of the VHF Talk logger http://vhftalk.aa1yn.com
Hooksett, NH
FN43gc52

----- Original Message ----- 
From: "Perry Ogletree" <pogletree at comcast.net>
To: "Discussion of DSP-10 2-meter transceiver" <dsp-10 at mailman.qth.net>
Sent: Saturday, March 29, 2008 4:28 PM
Subject: Re: [DSP-10] DSP-10: 2-M 8-Watt 'Brickette' Parts Wanted


> Look at the July 2005 and Dec 2005 at
> http://mailman.qth.net/pipermail/dsp-10/ (quick scan, there may be more 
> related threads).
> Also here http://www.aa1yn.com/dsp-10/brick/brick.html
> for a 30-watt version (note that the 50-ohm "pad" needed on the input 
> isn't shown in the schematic).
> Maybe AA1YN could supply more info?
>
> 73 de Perry - K4PWO
>
> ----- Original Message ----- 
> From: "Wayne Splawn" <wsplawn at worldnet.att.net>
> To: <dsp-10 at mailman.qth.net>
> Sent: Saturday, March 29, 2008 3:07 PM
> Subject: [DSP-10] DSP-10: 2-M 8-Watt 'Brickette' Parts Wanted
>
>
>>I am looking for someone who would like to sell either their unbuilt kit 
>>or
>> complete working unit or just the Mitsubishi RF power amp module, 
>> M57732L.
>>
>> I know the M57732L is out of production.  Is anyone aware of a direct
>> substitute part for the M57732L or perhaps know of a source that may 
>> still
>> have the part?
>>
>> Tnx & 73's
>> Wayne,
>>
>> WA7NE
>> _______________________________________________
>> DSP-10 mailing list
>> DSP-10 at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/dsp-10
>
> _______________________________________________
> DSP-10 mailing list
> DSP-10 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dsp-10
>