[DSP-10] Upgrade Flash chip in the DSPx

[William]

Can't Buy from Mouser
Flash has monitor program in it, you have to get from
http://www.kk7p.com/flashutil.html#REPLACE
At bottom of page 

Get prewritten Flash, and fallow directions there to up load dsp-10 software
all over again. If monitor gets destroyed by wrong upload address, you have
to get another unless you have a flash writer built, or purchased. 

Bill, KI4MYJ

-----Original Message-----
From: dsp-10-bounces at mailman.qth.net [mailto:dsp-10-bounces at mailman.qth.net]
On Behalf Of mwolf at speciosus.net
Sent: Monday, May 07, 2007 8:17 PM
To: dsp-10 at mailman.qth.net
Subject: [DSP-10] Upgrade Flash chip in the DSPx


   After moving  I now time to repair my DSP-10. At the same time I would
   like to upgrade the flash chip in my DSPx.
   My DSPx has the older Atmel 49BV512 Flash chip. I know that the larger
   flash  chip  is  the  SST  39VF040.  I  was wondering if any one could
   confirm  that  I  have  the  correct part numbers. Is the correct part
   number sst39vf040-45-4c-nh and RoHS part is sst39vf040-45-4c-nhe.
   Mouser has both of the parts in stock.
   -Thank You
     Matthew, N9MTT
_______________________________________________
DSP-10 mailing list
DSP-10 at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dsp-10