[DSP-10] Problems with Serial Shift Registers.

[kd7ts]

Hi Chuck,

I looked over my notes on this, and didn't see anything that fits your symptoms. The +9 on U6 points to a lock problem on the 19.68 synthesizer. From your description it seems most likely to be a programming problem with the 145170 registers. Programming is only done once when the program is loaded.


I do have a couple of questions though. 

Have you ever plugged P-101 in backwards then powered up the DSP-10 ?

Is hardware set to 1 in the config file, (UHFA.CFG) ?

What versions are you using for UHF3.EXE and UHFA.EXE ? 

73 Mike KD7TS