[DSP-10] Amplifiers being used

[Bob Larkin]

Hi Paul,

I suspect you are aware, but if not, the DSP-10 web site has the amplifier 
PCB files for both Express PCB and the more general Gerber files. If you or 
anyone else chooses to order a few boards, I suggest asking on this 
reflector, and there may be others that would share the costs/boards.

Along those lines, if anyone desires to do so, the Gerber files are now 
available to do a quantity run and we can post  the information. The 
quantities would not be great enough to be a "money maker," but the service 
could help those wanting to get on 2-meters.

The brickette is the only amplifier that I have used, as most others are 
not happy with the low power available from the basic radio.

The other option would be to build the amp pseudo-dead-bug 
construction.  My first amp was done that way and it worked fine. I just 
placed a piece of scrap PC stock by the amp module, basically using it as a 
groundplane.

Good luck with getting  an amp going!

73,
Bob  W7PUA

At 05:06 PM 11/16/2005, you wrote:
>It appears the circuit board for the brick amplifier for the DSP-10 is not
>readily available. Can members comment on what other amplifiers they may be
>using successfully.
>
>
>
>Thanks
>
>
>
>Paul Proefrock
>
>K0PRP
>
>_______________________________________________
>DSP-10 mailing list
>DSP-10 at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dsp-10