[DSP-10] ADSP 2181

[Perry Ogletree]

OK, that makes it less likely you have the wrong version of the DSP 
software.  Next question...  You say the mike works for other uses, if that 
is in a PC sound card, you may have a mike that needs voltage on the mike 
jack to work.  Most "electrotec" type mikes need 3-9 volts that most sound 
cards supply.  Next, are you sure you have the mike on the correct input 
channel?


----- Original Message ----- 
From: "kburt6" <kburt6 at comcast.net>
To: "Discussion of DSP-10 2-meter transceiver" <dsp-10 at mailman.qth.net>
Sent: Friday, June 03, 2005 6:06 AM
Subject: Re: [DSP-10] ADSP 2181


> I'm running EZ-Lite. All the EZ-Lite internally generated sound seems to
> work OK/
>
> 73, Ken, W6GHV
> ----- Original Message ----- 
> From: "Perry Ogletree" <pogletree at comcast.net>
> To: "Discussion of DSP-10 2-meter transceiver" <dsp-10 at mailman.qth.net>
> Sent: Thursday, June 02, 2005 8:54 PM
> Subject: Re: [DSP-10] ADSP 2181
>
>
>> Are you running a DSPx or a EZ-Lite?
>>
>> ----- Original Message ----- 
>> From: "kburt6" <kburt6 at comcast.net>
>> To: "Discussion of DSP-10 2-meter transceiver" <dsp-10 at mailman.qth.net>
>> Sent: Thursday, June 02, 2005 9:00 AM
>> Subject: [DSP-10] ADSP 2181
>>
>>
>>     Finally, Im getting started with my DSP-10 assembly.I have installed
> the
>> 2181 pgm in my computer and I can play the demos except when I go to my
> mike
>> input I dont get any sound. I have changed JP2 to mike input. I know the
>> mike is good because I use it with other pgms. Any help?
>> 73,Ken,W6GHV
>> _______________________________________________
>> DSP-10 mailing list
>> DSP-10 at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/dsp-10
>>
>>
>> _______________________________________________
>> DSP-10 mailing list
>> DSP-10 at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/dsp-10
>
> _______________________________________________
> DSP-10 mailing list
> DSP-10 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dsp-10
>