[DSP-10] dsp10 sensibility problem

Mon, 5 Jan 2004 11:04:46 +0100 (CET)

Doug and Kermit

Hello

I have made the check
I am OK (i think):
When i make the swap the noise floor is lower (have you seen this )
But I haven't make the test with a generator=20
thank you=20

Yoann F4DRU

> Message du 04/01/04 =E0 19h00
> De : Kermit Carlson <[email protected]>
> A : [email protected]
> Copie =E0 :=20
> Objet : Re: [DSP-10] dsp10 sensibility problem
>=20
> Hello !
>=20
>     I had exactly the same problem and results as Doug...
> a quick swap and you'll be on your way!
>=20
>                             Cheers,
>=20
>                                          Kermit W9XA
>=20
>=20
> ----- Original Message -----=20
> From: "Doug Bade" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, January 04, 2004 8:49 AM
> Subject: Re: [DSP-10] dsp10 sensibility problem
>=20
>=20
> > Yoann;
> >          I had a similar problem with mine when I first built it, I had=
=20
> > reversed the connections to the DSP board left and right channels. You=
=20
> > might want to double check them and make sure they are not crossed and=
=20
> > backwards... It also showed low output power. ( very low )
> >=20
> > Doug KB8GVQ
> >=20
> >=20
> > At 07:28 AM 1/4/2004, you wrote:
> > >Hello to all
> > >my name is Yoann F4DRU in france
> > >I am a sensibility problem on my DSP10
> > >I forward to all the mail i have send to BOB
> > >If any one can help me ...
> > >
> > >73 Yoann
> >=20
> >=20
> > _______________________________________________
> > DSP-10 mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/dsp-10
> >=20
> _______________________________________________
> DSP-10 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dsp-10
>=20
------------------------------------------

Faites un voeu et puis Voila ! www.voila.fr=20