[DSP-10] IT WORKS!!!

[Bob Larkin]

Hi Lyle - Congratulations! It is a big accomplishment!

I'm curious to see what dynamic range the TI part may add! Potentially
several bits worth! This may require some level shifting to fully utilize
the improvement.

Good Work.

73,
Bob  W7PUA

At 04:26 PM 3/26/03 -0800, you wrote:
>In the last few minutes I got the DSP-10 audio processor running.
>
>This is not a big deal, normally.
>
>But this is running on the new DSP module I designed.
>
>I managed to port the DSP-10 code to it by rewriting the CODEC
>initialization, etc.
>
>Closer to release!
>
>73,
>
>Lyle KK7P (who is too excited to make much sense right now... :-)
>
>BTW if you want to see a photo of the new module, go to
>http://www.fidalgo.net/~wa7gxd/
>
>the photo there is of a prototype with an ADSP-2187, but the board will use
>the -2185, which is the board that is currently running the DSP-10 code.
>And the Flash is a 49BV512, not the 49BV040 shown in the photo.  LJ
>
>
>_______________________________________________
>DSP-10 mailing list
>DSP-10@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dsp-10
>