[DSP-10] Initial testing

[Richard Ewing]

Gerard,

Go to : =
 http://home.teleport.com/~oldaker/doc_files/dsp10_initial_testing.doc

download the initial testing data.  Jimmy and I had some different readings=
=20
but were OK.  Hope that helps.

de KO7N

At 09:30 PM 4/24/2003 +0200, you wrote:
>Hello,
>
>Power has been fired on the board ! No smoke signals are good news ;-)
>
>I applied 13.8V because I had only this kind of power supply available. Of
>course, I used a radiator mounted on U101. Most of the voltages are nominal
>except those which are directly related to the supply voltage. BTW, some=20
>offset
>are not nominal :
>
>    * U105 pin 3 is 2.3 V instead of 3.5 V
>    * U106 pin 3 is 3.7 V instead of 4.6 V
>    * Q4 source is 1.38 V instead of 0.91 V
>    * U8 pin 3 is 2.5 V instead of 2.8 V
>    * U9 pin 3 is 3.4 V instead of 3.6 V
>
>I suspect something wrong for U105/U106 but resistors values good.
>
>--
>73 G=E9rard F6FGZ
>
>
>
>_______________________________________________
>DSP-10 mailing list
>DSP-10@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dsp-10