[DSP-10] Source of HP10811

[Ron Kolarik]

I picked up one of these for a lot less than $150 but it wasn't a
complete unit.  The oscillator was all I wanted anyway so it was
a fair deal.  Anyone need any parts for the HP 5328A send me
note with your request and I'll see if it's still on the chassis. Most
of the controls, connectors, etc. are there and have a few plug in
boards available.

Does anyone have any info on the board the oscillator plugs into?
A schematic with pinouts would help.

Ron  K0IDT

----- Original Message -----
From: "ak0b" <ak0b@swbell.net>
To: <dsp-10@mailman.qth.net>
Sent: Wednesday, March 27, 2002 13:25 PM
Subject: Re: [DSP-10] Source of HP10811


> A source of the older version of the 10811 is the HP 5328A.   Ebay has
both
> new and old versions show up but the cost is always  high,  but old  HP
> 5328A can be found on the web at some of the surplus test equipment houses
> for around $150 each.  You can not take a seller's word for which version
of
> the std is installed, but for $150 you get a nice counter plus one of the
> standard osc.
>
> Stan ak0b
>