AW: [DSP-10] stupid windows

[David Garnier]

Hi Paul,

Thank you for sending me that bin file.  I was able to burn a eprom
with the mot s record file ok but the ez-lite board appears to do
nothing at reset.  The memory device that was in my ez-lite board
was a SGS Thomson M27C1001 and I used a TI TMS27C010A
part, (the parts appear to be identical per their datasheets and truthtables.)
Maybe my understanding of the motorola s record is wrong, but it did
appear that it loaded the bin file at hex 0000.  I don't have time to
look at this now, I need to finish both boxes. ;-) Thanks anyhow Paul.
73's de wb9own

dave garnier

Paul Kupper wrote:

> Hi Hermann
>
> 1)      I had to compile the  "UHF3.EXE" Source to get the S-Record file.
> 2) I don't know which program you mean.
> 3) It is not possible to program the UHF3.EXE file directly.
> 4) If you have the UHF3 on EPROM on the EZ-Kit Lite you may start, after powering up the DSP-10, directly the DOS program without any other action.
> 5) No problem, the E-Mail is on the way
>
> You don't have to rejumper the EZ-Kit Lite Board, as long as you have 1M or 512k EPROM's.
>
> 73 de Paul HB9OMQ
>
> -----Urspr�ngliche Nachricht-----
> Von:    David Garnier [SMTP:dgarnier@wi.rr.com]
> Gesendet am:    Montag, 18. M�rz 2002 17:01
> An:     p.kupper@swissonline.ch
> Betreff:        Re: [DSP-10] stupid windows
>
> Hi Paul
>
> I just got my dsp10 running on the bench last night, it is not in the box yet
> but plan on finishing the box today (yes!)  I read ur message to Herman
> with great interest.  I have not looked at the dsp assembler at all, not sure
> I really want to right now.  Got a couple of question for you since I haven't
> seen it discussed recently on the dsp10 listserve...
>
> 1) which program  did you burn into the dsp eprom? Both?
>
> 2) what exactly does the first program do (25 words or less ;-) ?)
>
> 3) I bet I can't take the first program *.exe and burn it into location 0000 ?
>
> 4) If you compile the the first program into the eprom (a boot loader?)
> could I then -  run the second program immediantly?
>
> 5) If that's what you do Paul, would you be willing to send me (please)
> the BIN file or the S record file so I could burn my own eprom?
>
> Thank you and 73's Paul.
>
> dave garnier - de wb9own
>
> PS:  I bet Herman will have to rejumper his EZlite board to enable
> the smaller eprom to work
>
> _______________________________________________
> DSP-10 mailing list
> DSP-10@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dsp-10