AW: [DSP-10] ICOM MIKE

Mon, 18 Mar 2002 15:18:24 +0100

I use the DSP-10 with an Icom HM 12 mike and it works well. The Icom =
User Manuals show, that on the mike connector Pin 2  +8 Volt DC output =
is available. That is true but the Icom mike needs the Bias voltage on =
Pin 1. I use a Icom mike connector not the 5 Pin Din included in the =
TAPR kit. I've connected to Pin 2 5 Volts DC out from the DSP-10 Unit. =
>From Pin 1 I soldered a 1kOhm resistor to Pin 2 directly on the =
connector.

Hope that helps

73 de HB9OMQ Paul

-----Urspr=FCngliche Nachricht-----
Von:	Lee Scott [SMTP:[email protected]]
Gesendet am:	Freitag, 8. M=E4rz 2002 19:26
An:	[email protected]
Betreff:	Re: [DSP-10] ICOM MIKE

The Icom mike does require a bias voltage to make it work and some have=20
pre-amps in them.  Just haven't had the time yet to figure it all out. =
The=20
reason I want to be able to use the Icom mike is the fact I use the Icom =

746 as a liaison rig thus it gives me a spare mike and would like to =
have=20
one backup mike instead of two.

Lee - AA1YN

At 09:02 AM 3/8/2002 -0800, you wrote:
>At 08:51 AM 3/8/02 , you wrote:
>>Now, has anyone tried to set up the DSP-10 for the Icom mike?
>>
>>Lee - AA1YN
>Mike I tried the ICOM HM 12 and it DID NOT WORK.  I had mikes from =
Yeasu,=20
>Kenwood, Icom and Radio Shack.
>The only one that wouldnt work was the ICOM.
>
>I am using the Kenwood mobile mike and Dick KO7N is using the Yeasu =
mobile=20
>mike with equal results.  We both changed the mike connectors to match =
our=20
>mikes.
>
>
>
>
>* * * All outgoing email is virus scanned with Norton Anti-Virus 2002 * =
* *
>
>   Jimmy  Oldaker  -  W7CQ
>     Eugene, Oregon  USA
>      [email protected]
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>---
>_______________________________________________
>DSP-10 mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/dsp-10
>

_______________________________________________
DSP-10 mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dsp-10

--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  application/ms-tnef
---