[DSP-10] Trimmer Cap Color Code

[Sabal Mike]

For various and sundry reasons, I have elected to try and get the parts
myself rather than buy the kit from TAPR (which I would probably do on a
second go-round).  I have found the assembly instructions to be very
thorough, and very helpful so far.  There are a couple things that I
would find helpful if you could add them:

1. Assembly instructions for grounding, wiring, and "ferrite-beading"
the chassis jacks.
2. Specify the type of coax needed for the jumpers.
3. If you could list an alternative source for the DIN5 mic and DIN8
acc jacks (RS never seems to have the DIN5 in stock).
4. This might be getting a bit touchy, but if the power LED is going to
be on all the time, it might be helpful to list the recommended wattages
for the LEDs.
5.  I assume you've already added the sensitivity fix.
6. Specify alternative sources for the EZ-Kit Lite.

I look forward to d/l'ing the updated manual.  It's been a great help
already.

Still drillin',
Mike kb3gjt

>>> n7hpr@tapr.org 03/08/02 10:04AM >>>
I do have an update which I can send to Bob for posting.  But with all
the
questions about parts and assembly, maybe people don't know that the
assembly manual is there.  I also need feedback in order to improve
it.

Thanks,

- Steve, N7HPR
  (n7hpr@tapr.org)