[DSP-10] DSP software files

Mon, 3 Jun 2002 07:20:35 -0700

Hi Jim,

Here's the solution that worked for me:

>From Bob Larkin:
============================================================================
==
A couple of thoughts. To try all this out a few months ago, I got Disk1 and
Disk2 off the FTP site and was successful in installing them on a laptop. A
few minutes ago I looked at Disk2 that I had literally moved to a floppy and
noted that I had added a note file that said:

"For the install to work correctly, the "Disk 2" files need to
be located in the path A:\21xx\ezkitl\2181\

This needs to be created, most easily right on the floppy
such as is here.
============================================================================
==

Basically, if you place the disk 2 files at the above path on the A: drive
it works fine -- the install program expects them to be there and no other
path is acceptable.

Regards,
Robert
<><><><><><><><><><><><><><><><><><>
<       Robert A. Van Winkle       >
<            W B 6 H K A           >
<  Simplicity, The Most Difficult  >
<          Of All Concepts         >
<><><><><><><><><><><><><><><><><><>

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of [email protected]
Sent: Saturday, June 01, 2002 13:33 PM
To: [email protected]
Subject: [DSP-10] DSP software files

May thanks to W7PUA and TAPR and everyone involved in the DSP-10 project!

I'm still working at assembling my kit.  Everything is going well, except
for the Analog Devices DSP software from their FTP site.

I cannot get Disk 1 and Disk 2 installed on any of my computers.  During the
install everything goes well, until I reach 86% during file copying.  At
that point the program says "Copying Files ezkitapp.ex$".  It then asks for
disk 2; but no matter what path I enter, it cannot find the file
"ezkitapp.ex$".  It is on the disk, so I don't know why it can't find it.
At this point in the install, the only option that I have is to cancel.

Any help from the list would be greatly appreciated.

I really think that this project is great!  I've been assembling it at work
during my spare time, and all of my co-workers are curious as to what I am
up to.

Thanks,

Jim Albers N9CYL
Milwaukee, WI USA

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.
_______________________________________________
DSP-10 mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dsp-10